Add:No.1,Jingqi Road,Hi-tech Zone, Yantai City, Shandong Province, China
Sales Hotline:+86-18663896299
Customer Service Department:
Tel:+86-535-6726618
Fax:+86-535-6726618
E-mail:haige@haigechina.com

ProductsYour current location:Home > Products > Centerless Lathe >
WXC80C Centerless Lathe
Release time:2014-08-19 16:26
Introduction:
Specification WXC80C
RAW  
MATERIALS
Diameter Range(mm) Φ21~Φ85
Raw Material Length(mm) ≥2200
Tensile Strength (M pa) ≤1100 
Surface Hardness ≤HB320
Curvature(mm/m) ≤1.50
Diameter Tolerance According to GB 702-88 second group
Roundness ≤50% of the diameter tolerance
Surface Roughness(Ra) ≤25~50μm
FINISHED  
GOODS
Diameter Range Φ20~Φ80
Unilateral Cutting Depth (mm) 0.35~1.50
Diameter Tolerance ≤IT9 (standard tolerance grade)
Surface Roughness(Ra) ≤6.3μm
Roundness ≤0.03mm
Feeding Cutting Speed(m/min) 1.0-10.0(for continuous chips and high
strength and hardness should reduce the speed)
Cutter Head Rotational Speed(rpm) 430~1200
Main Machine Motor Power(KW) 55
Auxiliary Machine Motor Power(KW) 5.5 X 2(Four Poles)
Main Machine Outline Dimensions
(Length*Width*Height) m
3.0m X 3.5m X 2.4m ( for your reference)
Full Set Machine Outline Dimensions
(including auxiliary machine)
(Length*Width*Height) m
15.0m X 5.0m X 2.4m ( for your reference)
Main Machine Weight
(including auxiliary weight) (T)
8.0 (11.5) ( for your reference)
Total Capacity(KW) 75
Compressed Air Source
(user prepare by themselves)

0.5-0.8Mpa,1.8m3/min、0.8m3 gasholder、
two-stage oil-water separator and compressed air freezing drier