Add:No.1,Jingqi Road,Hi-tech Zone, Yantai City, Shandong Province, China
Sales Hotline:+86-18663896299
Customer Service Department:
Tel:+86-535-6726618
Fax:+86-535-6726618
E-mail:haige@haigechina.com

ProductsYour current location:Home > Products > Centerless Lathe >
130S Centerless Lathe
Release time:2014-08-16 16:28
Introduction:
MODEL WXC130S
RAW 
MATERIALS
Diameter Range(mm) Φ40~Φ135
Raw Material Length(mm) ≥2800
Tensile Strength(Mpa) ≤1100
Surface Hardness ≤HB320
Curvature(mm/m) ≤1.50
Diameter Tolerance According to GB 702-88 second group
Roundness ≤50% of the diameter tolerance
Surface Roughness(Ra) ≤25-50μm
FINISHED 
GOODS
Diameter Range Φ35-Φ130
Unilateral Turning Depth (mm) 1-2.5
Diameter Tolerance ≤IT9 (standard tolerance grade)
Surface Roughness(Ra) ≤12.5μm
Curvature(mm/m) ≤1.5
Roundness ≤0.03
Feeding Cutting Speed(m/min)

0.8-1.5 (for continuous chips and high strength and hardness should reduce the cutting speed)

Cutter Head Rotational Speed(rpm) 240-670 (Six poles) 360-1000 (Four poles)
Main Machine Motor Power(KW) 110
Auxiliary Machine Motor Power(KW) 11(feeding part)
Main Machine Outline Dimensions 
(Length*Width*Height) m
5.3 X 3.5 X 3 ( for your reference)
Full Set Machine Outline Dimensions
(Including auxiliary) (Length*Width*Height) m
18 X 3.5 X 3 ( for your reference)
Main Machine Weight
(including auxiliary weight) (t)
20.5 (29)
Total Installed Capacity(KW) 130
Compressed Air Source
(users prepare by themselves)

0.5~0.8MPa、1.8m3/min、more than 0.8 m3 gasholder, two-stage oil-water separator and compressed air freezing drier

Attention:
Raw materials bending as small as possible, so as to better ensure product accuracy, the efficiency and the service life of equipment. If the raw material straightness is larger, turning before straightening, otherwise it will seriously affect the product precision, efficiency and life of equipment. If the raw head having severe flash, flat head and bending, turning before resection of flat head and a bent portion, flying edge chamfering.

Previous: 80S Centerless Lathe Next:This is the last one