Add：No.1,Jingqi Road,Hi-tech Zone, Yantai City, Shandong Province, China
Sales Hotline：+86-18663896299
Customer Service Department：
Tel：+86-535-6726618
Fax：+86-535-6726618
E-mail：haige@haigechina.com
ProductsYour current location：Home > Products > Centerless Lathe >
WXC30C Centerless Machine Tool
Release time：2014-08-19 16:13
Introduction:
| Specification | WXC30C | |
| Raw Material | Diameter Range (mm) | Φ6~Φ32 |
| Raw Material Length (mm) | ≥1400 | |
| Tensile Strength (M pa) | ≤1100 | |
| Surface Hardness | ≤HB320 | |
| Curvature (mm/m) | ≤1.5 | |
| Diameter Tolerance | according to GB 702-88 second group | |
| Roundness(mm) | ≤50% of diameter tolerance | |
| Surface Roughness (Ra) | ≤25～50mm | |
| Finished Goods |
Diameter Range (mm) | Φ5.5~Φ30 |
| Unilateral Cutting Depth (mm) | 0.2~1.0 | |
| Diameter Tolerance | ≤IT9 (standard tolerance grade) | |
| Surface Roughness (Ra) | ≤6.3μm | |
| Roundness (mm) | ≤0.03 | |
| Feeding Cutting Speed (m/min) | 1.0~8.0(for continuous chips and high strength and hardness should reduce the speed) | |
| Cutter Head Rotational Speed(rpm) | 900-2500 | |
| Main Machine Motor Power (KW） | 30 (2 Poles) | |
| Auxiliary Machine Motor Power(KW) | 4 X 2（4 Poles） | |
| Main Machine Outline Dimensions (Length*Width*Height) m |
2.0mX2.2mX1.5m (for your reference) | |
| Full Set Machine Outline Dimensions (Including auxiliary machine) m |
12.0mX2.2mX1.5m (for your reference) | |
| Main Machine Weight (including auxiliary weight) (T) |
3.3 (4.5) | |
| Total Capacity（KW） | 65KW | |
| Compressed Air Source（user prepare by themselves） | 0.5~0.8MPa、1.8m3/min、more than 0.8 m3 gasholder, two-stage oil-water separator and compressed air freezing drier | |
Attention:
Raw materials bending as small as possible, so as to better ensure product accuracy, the efficiency and the service life of equipment. If the raw material straightness is larger, turning before straightening, otherwise it will seriously affect the product precision, efficiency and life of equipment. If the raw head having severe flash, flat head and bending, turning before resection of flat head and a bent portion, flying edge chamfering
点击或扫描下载